当前位置: 首页 » 供应库 » 五金工具 » 轴承 »

泰州INA轴承RNA4906使用精密件的事项处理

泰州INA轴承RNA4906使用精密件的事项处理
  • 泰州INA轴承RNA4906使用精密件的事项处理
  • 泰州INA轴承RNA4906使用精密件的事项处理
  • 泰州INA轴承RNA4906使用精密件的事项处理
泰州INA轴承RNA4906使用精密件的事项处理图片
  • 所属行业:五金工具 » 轴承
  • 单价:19.80元/套
  • 所在地:江苏 无锡
  • 最小采购量:1 套
  • 总供货量:3000 套
  • 有效期:长期有效
  • 发布日期:2018-12-06 14:07
  • 公司名称:鸿御(上海)国际贸易有限公司销售部  (普通会员)

 QQ交谈 | 进入企业店铺 | 请供应商联系我

立即购买 联系电话
13311666672 联系人:赵先森
(来电时请说是在易供求网上看到的)

产品参数

品牌:

INA轴承

所在地:

江苏 无锡

起订:

≥1 套

供货总量:

3000 套

有效期至:

长期有效

发布日期::

2018-12-06 14:07

包装:

商包

质量体系:

ISO9000

质量保证:

合同签罚

详细介绍

滚动泰州INA轴承是精*密零件,应谨慎使用。无论使用多么高性能的轴承,如果使用不当,预期的高性能将不能实现。轴承使用中应注意的事项如下。

Rolling Taizhou INA bearings are precision and dense parts, which should be used with caution. No matter how high-performance bearings are used, if improperly used, the expected high performance will not be achieved. The matters needing attention in the use of bearings are as follows.

(1)进口轴承环的圆周应获得良好的支承和均匀的载荷,以减少变形,充分发挥承载能力。

(1) The circumference of the imported bearing rings should be well supported and uniformly loaded to reduce deformation and give full play to the bearing capacity.

即使看不见的灰尘进入轴承,也会增加轴承的磨损、振动和噪声。轴承及其周边附件应保持清洁,特别是灰尘和灰尘。工具和工作环境也必*须保持清洁。

Even if the invisible dust enters the bearing, it will increase the wear, vibration and noise of the bearing. Bearings and their peripheral accessories should be kept clean, especially dust and dust. Tools and working environments must also be kept clean.

用手直接取泰州INA轴承时,应彻底清洗出汗,并在操作前涂上优*质矿物油。在雨季和夏季,应特别注意防锈。然而,在某些特殊情况下,轴承寿命比传统计算要长,特别是在轻载条件下。

When taking Taizhou INA bearing directly by hand, sweat should be thoroughly cleaned and high quality mineral oil should be coated before operation. In rainy season and summer, special attention should be paid to rust prevention. However, in some special cases, the bearing life is longer than the traditional calculation, especially under light load conditions.

尽量使用专用工具,尽量避免使用布料和短纤维。

Use special tools as far as possible and avoid using cloth and short fibers as far as possible.

没有强大的冲压,没有锤子,没有轴承剂的直接攻丝,没有通过滚动元件的压力传递。

No powerful stamping, no hammer, no direct tapping of bearing agent, no pressure transmission through rolling elements.

1。轴承维修

1. Bearing maintenance

为了判断拆卸后的泰州INA轴承是否可重复使用,必*须对清洗过的轴承进行检查,仔细检查滚道表面、滚动面和配合面的状态、保持架的磨损、轴承间隙的增加、损伤和异常。TY与尺寸精度的降低有关。不可分离球轴承,内圈用一只手支撑,外圈转动,确认是否光滑。

In order to judge whether the detached Taizhou INA bearings can be reused, it is necessary to check the cleaned bearings, carefully check the raceway surface, rolling surface and mating surface, cage wear, increase of bearing clearance, damage and abnormality. TY is related to the reduction of dimensional accuracy. Non-separable ball bearing, the inner ring is supported by one hand, the outer ring rotates to confirm whether it is smooth or not.

通过考虑轴承的损伤程度、力学性能、重要性、操作条件以及下次大修周期来确定是否可以重复使用。然而,如果存在以下缺点,它们就不能再使用了。必*须更换*新轴承:

By considering the damage degree, mechanical properties, importance, operating conditions and the next overhaul cycle of the bearing to determine whether it can be reused. However, if the following shortcomings exist, they can no longer be used. New bearings must be replaced.

2。轴承清洗

2. Bearing cleaning

在拆卸和修理泰州INA轴承时,首先记录轴承的外观,确认润滑剂的残留量,然后对轴承进行取样、检查和清洁。作为清洁剂,汽油和煤油是常用的。清洗轴承时,在容器内分别进行粗清洗和细清洗。首先,轴承放置在金属网的底部,使得轴承不直接接触容器中的灰尘。粗清洗时,如果轴承因污垢而旋转,会损坏轴承的滚动表面,应引起重视。刷子用于去除、粗化和清洁原油、润滑脂和粘合剂。清洗时,轴承的价*格是清洗油在旋转轴承中,同时应仔细清洗。此外,清洁油也应定期保持清洁。

When disassembling and repairing Taizhou INA bearing, the appearance of the bearing is first recorded, the residual amount of lubricant is /confirm/ied, and then the bearing is sampled, inspected and cleaned. As cleaners, gasoline and kerosene are commonly used. When cleaning bearings, rough cleaning and fine cleaning are carried out respectively in the container. First, the bearing is placed at the bottom of the metal mesh, so that the bearing does not directly contact the dust in the container. When roughly cleaning, if the bearing rotates due to dirt, it will damage the rolling surface of the bearing, which should be paid attention to. Brushes are used to remove, coarsen and clean crude oil, grease and adhesives. When cleaning, the price of the bearing is to clean the oil in the rotary bearing, and it should be carefully cleaned at the same time. In addition, clean oil should also be kept clean regularly.

 

文章来自:泰州SKF轴承 www.wh-skf.com

Article from: Taizhou SKF Bearing www.wh-skf.com

文章来自:泰州INA轴承 www.ina-china.cn

Article from: Taizhou INA Bearing www.ina-China.cn

文章来自:泰州NSK轴承 www.klbbearings.com

Article from: Taizhou NSK Bearing www.klbbearings.com

 

QQ524085168

电话:0510-81207777

手机:13311666672/13395185757

 

如果您对该信息“泰州INA轴承RNA4906使用精密件的事项处理”感兴趣,欢迎您来电获取详细资料,联系我时请说明是在易供求网看到的,谢谢! 本页链接:http://www.yigongqiu.com/sell/4496857.html 手机版:http://m.yigongqiu.com/5-0-4496857-1.html 已经有0位访客查看了本页
还没找到您需要的产品?立即发布您的求购意向,让五金工具 » 轴承供应商主动与您联系!发布紧急求购

该企业其他产品

编号 产品名称 联系人 电话 产地区域 更新时间
1 徐州NSK轴承61805N润滑规则的广泛性优点 赵** 133***** 江苏无锡 2018-12-19 13:57
2 徐州SKF轴承61801N定期检查规律性调整 赵** 133***** 江苏无锡 2018-12-18 11:52
3 徐州INA轴承RNA6909锈蚀生于使用中的通病 赵** 133***** 江苏无锡 2018-12-17 17:37
4 徐州NSK轴承61922-2Z位于油缸上的密封与静密封状况 赵** 133***** 江苏无锡 2018-12-14 13:20
5 泰州SKF轴承6214-2Z市场国际趋势与行业利弊 赵** 133***** 江苏无锡 2018-12-07 11:27

轴承最新产品

编号 产品名称 联系人 电话 产地区域 更新时间
1 徐州NSK轴承61805N润滑规则的广泛性优点 赵** 133***** 江苏无锡 2018-12-19 13:57
2 INA_81230推力滚子轴承_苏州轴承公司销售提供 周** ***** 江苏苏州 2018-12-19 08:37
3 钜隆晟业批发销售FAG_NUP2313E.TVP2圆柱滚子轴承 周** ***** 江苏苏州 2018-12-19 08:35
4 徐州SKF轴承61801N定期检查规律性调整 赵** 133***** 江苏无锡 2018-12-18 11:52
5 徐州INA轴承RNA6909锈蚀生于使用中的通病 赵** 133***** 江苏无锡 2018-12-17 17:37

泰州INA轴承RNA4906使用精密件的事项处理在线询价

姓 名:
*
手机/固话:
*
询价标题:
*
留言内容:
验证码: